tubeUp to 8 kWRound / square / rect / open up to 12 in
- ✓One cycle = saw + deburr + notch + drill + tap
- ✓Smart Weld auto-orients the cut to the seam
- ✓Smart Mandrel adds flow drilling + tapping to M12
Round TubeSquare TubeRectangular TubeOpen Profile
Authorized Midwest distributor, 9 states
Cutlite Penta
Italian Fiber Lasers, Tube & Sheet
One builder. One cutting head. Six platforms. 2 kW to 60 kW.
Model Lines6
Max Power60 kW
Max Sheet150 × 15 ft
Built InItaly
The Lineup
Featured Cutlite Penta models
tubeUp to 8 kW
flat-sheetUp to 30 kW10×5 ft to 19.9×6.7 ft
- ✓4.2 G cuts complex shapes at full speed
- ✓EVO 3 head rated 50 kW, 25 bar
- ✓Smart Changer auto-swaps 10 nozzles, lights-out
Sheet MetalThin PlateHigh-Speed Production
flat-sheetUp to 60 kW10×5 ft to 59.4×10 ft
- ✓Cut weld-prep angles directly, no second-op grinding
- ✓Two-level pallet exchange runs while loading
- ✓EVO 3 with absolute encoders on B/C axes
Sheet MetalPlateWeld-Prep AnglesRobotic Welding Prep
flat-sheetUp to 60 kWUp to 150 × 15 ft · Up to 60 kW
- ✓Take plate work other lasers can't cut
- ✓Smart Bevel Pro for robotic welding prep
- ✓Smart Drill turret adds drilling + tapping
PlateStructuralPlasma ReplacementOxy-Fuel Replacement
flat-sheetUp to 20 kWModel 3015 / 4015 / 4020 / 6020 / 6225
XME / XMF, Entry-Level Fiber
European build quality without flagship pricing
10×5 ft to 20.4×8.4 ft
- ✓Replace CO2 without flagship capital outlay
- ✓Same EVO 3 head as PLUS, identical cut quality
- ✓Self-replaceable work-table slats
Sheet MetalCO2 ReplacementJob ShopMid-Production
automationLights-out readyModel Vacuum Lifter · Forklift · DCS · DFS
Automation & Dynamic Storage
Lights-out loading, unloading, storage
Inline or 90° · Modular and expandable
- ✓Run unattended through shifts and weekends
- ✓DCS uses vertical space above the pallet changer
- ✓Butterfly conveyor adapts to shop layout
Lights-OutAutomationMaterial Storage
finishingModularModel D / B / S Units
Deburring & Finishing
Take dross and burrs off the part before it reaches the next station
Slag removal · edge rounding · surface finishing
- ✓Remove laser dross and plasma slag in one pass
- ✓Round edges up to 2 mm radius, no hand grinding
- ✓Take parts from graining to near-mirror polish
DeburringEdge RoundingSlag RemovalSurface Finishing
Product Architecture
4 product families
1 model
Tube Cutting
3D tube laser, round, square, rectangular, open profile to 12 in.
4 models
Flat Sheet Lasers
Four platforms: XME entry, FAST high-dynamic, PLUS bevel, FIBER HD large-format.
1 model
Automation & Storage
Vacuum lifters, forklifts, Dynamic Compact / Flexible Storage for lights-out runs.
1 model
Deburring & Finishing
Modular deburring, edge-rounding, and surface-finishing units, slag removal to near-mirror polish.
For Your Shop
Six platforms, one machine builder, from a 10-ft entry sheet laser to a 150-ft plasma killer.
What This Solves
Built for shop-floor problems
The old way
With Cutlite Penta
Tube parts run through 3–4 machines
✓
TUBE platform cuts, bevels, drills, and taps in one cycle
1 cell replaces 3–4 stations
Laser capped at 8 kW / 5×10 ft, lose plate bids to plasma
✓
FIBER HD scales to 60 kW and 150 × 15 ft
Take plate work other lasers can't cut
Welding cell sits idle waiting on bevel grinding
✓
Smart Bevel Pro cuts V/A/X/Y/K weld preps ±45° in-cycle
Eliminate the cut-to-weld grinding step
Old CO2 eats 30 kW idle; chiller maintenance never stops
✓
Sealed IPG fiber in NEMA 12, fraction of CO2 wall power
70%+ less energy · payback inside 24 months
Can't staff a 4th shift, machines idle 6pm–6am
✓
Vacuum Lifter + DCS/DFS runs the cell lights-out
24/5 unattended production
Why Cutlite Penta
- Same EVO 3 head across every platform, XME to FIBER HD
- IPG sources 2–60 kW · solid-state · NEMA 12 sealed
- Linear-motor gantry hits 4.2 G with zero radial jerk
- Smart Bevel Pro: V/Y/X/K weld preps up to ±45°
- Designed and built end-to-end in Prato, Italy
Shared Technology
What runs across the line
EVO 3 Cutting Head
Autofocus head with non-contact capacitive sensing. Runs on XME, FAST, PLUS, FIBER HD. Rated for 50 kW and 25 bar.
Smart Bevel Pro
V, A, X, Y↑, Y↓, K weld preps at ±45° while keeping 2D quality. Parts go straight to the welding robot.
IPG Fiber Source
Solid-state, NEMA 12 sealed, near-zero maintenance. Sizes from 2 kW (XME) to 60 kW (FIBER HD).
Smart Mandrel
10-station tool changer on the TUBE platform. Flow drilling and tapping to M12 in-cycle, finished, tapped tube parts off one machine.
Bundle & Step Loaders
Step loader handles 6 tubes. Bundle loader handles 2,000–4,000 kg for unattended 24/5. Optical size sensors.
Dynamic Storage (DCS / DFS)
DCS sits above the pallet changer, no footprint expansion. DFS scales with multiple towers. Both store raw + cut.
Sample Work
More from the Cutlite Penta catalog
Get a Quote
Ready to talk specs?
Forge is the authorized Cutlite Penta distributor across the Midwest. Tell us your application, we'll size the right unit and back it with regional service.