ironworkers← Spartan Ironworkers Hydraulic IronworkersModel MSIW66S – MSIW192DX
Spartan Ironworker
Five work stations on one frame, 60 to 192 tons
Punch 60 – 192 tons · 5 work stations
- ✓Punch, shear, trim, and notch from one frame instead of four machines
- ✓Spec punching pressure and shear capacity to the structural work you bid
- ✓Buy, set up, train, and service direct through Forge
IronworkerPunch · Shear · Notch60 – 192 ton
Overview
The Spartan Ironworker family puts punching, bar shearing, angle shear, flat-bar shear, and notching on a single hydraulic frame. Six models span 60 to 192 tons of punching pressure, so you spec the machine to the holes you punch and the sections you shear. All specifications are based on 65,000 PSI tensile-strength material. Forge sells and services Spartan regionally.
Specifications
Work Stations
PunchingStandard
Bar ShearingStandard
Angle ShearStandard
Flat Bar ShearStandard
NotchingStandard
Reference Material
BasisSpecifications based on 65,000 PSI tensile-strength material
Available Configurations
| Spec | MSIW66S | MSIW60D | MSIW71D | MSIW93D | MSIW126D/DX | MSIW192DX |
|---|---|---|---|---|---|---|
| Work Stations | 5 | 5 | 5 | 5 | 5 | 5 |
| Punching Pressure | 66 Tons | 60 Tons | 71 Tons | 93 Tons | 126 Tons | 192 Tons |
| Standard Tooling | 1-1/4" x 5/8" | 1-1/2" x 1/2" | 1-1/2" x 9/16" | 1-1/2" x 3/4" | 1-1/2" x 1" | 1-1/2" x 1-1/2" |
| Large Tooling | n/a | 2" x 3/8" | 2" x 7/16" | 2" x 9/16" | 2" x 3/4" | 2" x 1-3/16" |
| Oversize Tooling* | n/a | 4" x 3/16" | 4-5/16" x 3/16" | 4-5/16" x 1/4" | 4-5/16" x 5/16" | 4-5/16" x 1/2" |
| Throat Depth | 8-5/8" | 12" | 12" | 14" | D: 14" DX: 24" | 24" |
| Stroke Length | 2-1/8" | 2-5/16" | 2-5/32" | 3-1/8" | 3-1/8" | 3-1/8" |
| Cycle/Min. (3/4") | 25 | 25 | 25 | 25 | 25 | 22 |
| Punching, Work Height | 41-1/4" | 40-7/8" | 40-9/16" | 42-1/2" | 43-3/4" | 44-1/2" |
| Flat Bar Shear Capacity | 12" x 9/16" | 14" x 1/2" | 14" x 5/8" | 18" x 9/16" | 14" x 1" | 16" x 1" |
| Flat Bar, Width & Thickness | 8" x 3/4" | 10" x 3/4" | 12" x 3/4" | 14" x 3/4" | 24" x 9/16" | 24" x 3/4" |
| Flat Bar, Blade Length | 12-7/16" | 15" | 15" | 19" | 24" | 24" |
| Angle Flange Trim | 3" x 3/8" | 3" x 1/4" | 4" x 3/8" | 4" x 1/2" | 5" x 5/8" | 5" x 5/8" |
| Flat Bar, Work Height | 37-9/16" | 35-3/4" | 35-1/2" | 37" | 37" | 37" |
| Angle Shear, 90 Degrees | 4" x 4" x 7/16" | 4" x 4" x 3/8" | 4" x 4" x 3/8" | 6" x 6" x 1/2" | 6" x 6" x 5/8" | 8" x 8" x 3/4" |
| Angle Shear, 45 Degrees | 3" x 5/16" | 2-1/2" x 2-1/2" x 3/8" | 2-1/2" x 2-1/2" x 3/8" | 3" x 3" x 5/16" | 3" x 3" x 3/8" | 3" x 3" x 3/8" |
| Angle Shear, Work Height | 45-1/2" | 44-1/2" | 44-7/8" | 47-1/4" | 48" | 44-1/2" |
| Bar Shear, Round Bar | 1-1/2" | 1-1/2" | 1-3/4" | 2" | 2" | 2-1/4" |
| Bar Shear, Square Bar | 1-3/8" x 1-3/8" | 1-1/2" x 1-1/2" | 1-3/4" x 1-3/4" | 2" x 2" | 2" x 2" | 2" x 2" |
| Channel Shear** | 3" | 4" | 5" | 6" | 7" | 10" |
| H Beams** | 3" | 4" | 5" | 6" | 7" | 10" |
| T Beams** | 3" x 5/16" | 3" x 1/4" | 3-1/2" x 7/16" | 4" x 7/16" | 5" x 1/2" | 6" x 9/16" |
| Bar Shear, Work Height | 45-1/2" | 44-1/2" | 44-7/8" | 37" | 37" | 44-1/2" |
| Rectangular Notcher | 1-5/8" x 3-15/16" x 3/8" | 1-3/4" x 3-1/2" x 3/8" | 1-3/4" x 3-9/16" x 3/8" | 2" x 4" x 1/2" | 2-3/8" x 4" x 1/2" | 2-3/8" x 4" x 5/8" |
| Large V** | 4" x 4" x 3/8" | 4" x 4" x 3/8" | 4" x 4" x 3/8" | 4" x 4" x 1/2" | 4" x 4" x 1/2" | 4" x 4" x 5/8" |
| Notching, Work Height | 41-9/16" | 35-1/2" | 35-1/2" | 37" | 37" | 36-1/2" |
| Single V Bending Attachment | 4" with 2-1/2" wide V | 10" with 3" wide V | 10" with 3" wide V | 10" with 3" wide V | 10" with 3" wide V | 10" with 3" wide V |
| Multi V Bending Attachment | n/a | 19-1/2" with 1/2", 3/4", 1", 1-1/4" wide V | 19-1/2" with 1/2", 3/4", 1", 1-1/4" wide V | 19-1/2" with 1/2", 3/4", 1", 1-1/4" wide V | 27-1/2" with 1/2", 3/4", 1", 1-1/4" wide V | 27-1/2" with 1/2", 3/4", 1", 1-1/4" wide V |
Additional configurations available on request.
Key Features
- ›Five standard work stations: punching, bar shearing, angle shear, flat-bar shear, notching
- ›Punching station with die holder and punch table
- ›Bar shearing station
- ›Angle shear station
- ›Flat-bar shear station
- ›Notching station
- ›Single-V and multi-V bending attachment options
- ›Specifications based on 65,000 PSI tensile-strength material