<!--StartFragment--> <p>The TN-800 Tube and Pipe Notcher does what no other tubing notcher on the market can do: <strong>notch tube from 1” to 3” OD without any change in tooling, hole saws, or mandrels</strong>.</p> <ul><li>Made in the USA.</li><li><strong>1 hp motor</strong> runs on <strong>110-volt power</strong>. You can operate it almost anywhere, including in the field.</li><li>Notches <strong>up to 60°</strong>.</li><li>Carefully-chosen <strong>milling speed of 350 rpm</strong> balances cutting power with long machine life and low wear and tear.</li><li>Our tooling-free design lets you <strong>simply dial in the OD that you want to notch</strong>—and the tube notcher will change its eccentric path and produce a perfect notch.</li><li>Vise adjusts in just about every way possible, featuring <strong>X- and Y-axis control</strong> to ensure a good cutting position.</li><li><strong>Degree or angle-finder</strong> makes it simple to check the angle and ensure repeatability.</li><li>If you want a more traditional notch, the <strong>cam lock enables you to set your degrees</strong>; just move it in either direction to angle the notch.</li><li>Heavy-duty <strong>cast iron framework reduces vibration</strong>, prolongs machine life, and delivers more accurate results.</li><li>Includes <strong>portable cart with wheels</strong>, so that when you’re not using the TN-800 you can roll it out of the way.</li></ul> <!--EndFragment-->